Handmade in Moss Vale, NSW

Safety Razor Travel Case

Magnetic Hard Case with Blade Storage

$35.00

Free AU shipping over $99 · Ships within 1-4 business days

Handmade to order — usually ships in 2–4 business days from Moss Vale, NSW

A hard case for your safety razor, sized for the razor and the blades that go with it. The razor sits in a fitted cradle with its head held off the floor, two slots take a spare pack of DE blades each, and a magnet snaps the lid shut. It goes in the wash bag, and nothing in it rattles or gets bent.

At a glance

HoldsOne DE safety razor + 2 blade packs
ClosureMagnetic, with a stainless steel hinge pin
Size126 × 53 × 34mm
MaterialMatte charcoal polymer (plant-based)
MadeSmall batches in Moss Vale, NSW
Australian madeMagnetic closureBlade storageAir-vented

Built around the razor

Most razor cases are a pouch or a foam box that fits nothing in particular. This one is shaped inside around a double edge razor. The head sits in its own cradle, the handle lies in V-shaped seats, and a keeper at the tail end stops it sliding. When you close the lid it holds the razor in place from above as well.

The two slots on either side of the handle each take a standard tuck pack of DE blades, so a week away or a month away needs no extra packing. One small vent in each half lets a rinsed razor finish drying instead of sitting sealed in the damp.

Design drawing of the Stuga safety razor travel case showing the razor cradle, blade slots, air vents and magnetic closure
Drawn up in Moss Vale. Every cradle and slot is set to the millimetre before one is made.

Why it works

  • Magnetic closure: the lid snaps shut with no clasp to break or catch
  • Stainless steel hinge pin: a steel pin through the hinge, built to open and close for years
  • Fitted razor cradle: the head is held clear and the handle can't roll, so nothing knocks the blade edge
  • Two blade-pack slots: your spare DE blades travel with the razor
  • Vented: a damp razor can keep drying inside the case
  • Hard shell: a solid polymer case, not a pouch, so a razor in your bag stays protected

The details

  • FitsMost DE safety razors up to about 114mm long, three-piece and butterfly
  • Blade storage2 slots, each holding one tuck pack of DE blades (depending on brand)
  • ClosureMagnetic
  • HingeStainless steel hinge pin
  • Size126 × 53 × 34mm, excluding the hinge
  • MaterialMatte charcoal polymer (plant-based)
  • MadeSmall batches in Moss Vale, NSW, Australian made

Questions, answered

Will my safety razor fit?
Most double edge safety razors up to about 114mm long fit, including three-piece and butterfly designs. If you're not sure about a long-handled razor, message us its length and we'll check it.
How many razor blades does it hold?
There are two slots, and each takes one tuck pack of DE blades. Pack sizes differ slightly between brands, but most standard 5- and 10-blade tuck packs fit.
Can I take a safety razor on a plane?
Loose razor blades aren't allowed in carry-on luggage in Australia and most other countries. Pack the case with its blades in your checked bag. If you're flying carry-on only, take the blade out of the razor and leave the blade packs at home. Rules vary by airline, so check before you fly.
Can I put the razor away wet?
Rinse it and shake it off first. The vents let the last of the moisture escape, but it's best to let the case air out once you've unpacked.
Is it waterproof?
No. The case is vented on purpose, so moisture can get out instead of being sealed in with the blade.

Build your kit

Pair it with the three-piece WÖLFE 97 or the butterfly-open WÖLFE 75, and fill the slots with double edge blades. At home, the Razor Rest keeps the razor upright between shaves, and the Blade Bank takes the used blades. New to safety razors? Our Double Edge Safety Razor Guide covers the basics.

Made in small batches in Moss Vale · Southern Highlands, NSW · Free shipping over $99

 

Safety Razor Travel Case $35.00
What others are saying

Customer reviews

Honest words from the people who use it.

Loading reviews…